RaLiSat-1 design challenges - Payload internal temperature
As we know, the higher you reach in altitude, the lower the temperature and pressure is. At around 25 kms which is my target for this project, the temperature is -56°C. This
raspberry pi
RaLiSat-1 Payload system design
To start with, I had basic goals for designing the payload system. Including basic sensors necessary for the tracking, camera to capture the beauty and the design to sustain the system at harsh
Aquarium automation using Raspberry Pi
As a childhood desire, I always wanted to try setup an aquarium at my home. The desire was always there deep inside and never sparked until my daughter had to do some school
Interfacing Ublox GPS M8N with Raspberry Pi
Ublox GPS M8N module support UART communication and its fairly integrate with your Raspberry Pi. Just connecting to power and Rx wires will allow you to read the GPS NMEA messages. However the
Sending large data like images over Lora
Got obsessed with the Lora module E32-868T30D after playing with it for couple of months now. To be honest, this seemed to me like a life saver for hobbyists to start on RF.