Building a retro style game console from scratch

Game console built from scratch using RPi Pico micro controller and 2 inch LCD display

Remote ePaper display using ESP32

I had a 7.8 inch ePaper display from Waveshare lying around for a while. This is an expensive eInk display with 1872x1404 pixel resolution that supports 4 bit grayscale values.

Home power consumption monitoring using ESP32

Its always fun to collect data around you and understand your needs better. When it comes to power consumption, end of the month bill gives us a pretty good view, but I wanted to…

For my high altitude balloon project, I am designing a portable base station system to recieve the transmission from the payload.

As we know, the higher you reach in altitude, the lower the temperature and pressure is. At around 25 kms which is my target for this project, the temperature is -56°C. This is…

To start with, I had basic goals for designing the payload system. Including basic sensors necessary for the tracking, camera to capture the beauty and the design to sustain the…

As a childhood desire, I always wanted to try setup an aquarium at my home. The desire was always there deep inside and never sparked until my daughter had to do some school…

Ublox GPS M8N module support UART communication and its fairly integrate with your Raspberry Pi. Just connecting to power and Rx wires will allow you to read the GPS NMEA…

Got obsessed with the Lora module E32-868T30D after playing with it for couple of months now. To be honest, this seemed to me like a life saver for hobbyists to start on RF. My…

Article explaining how to connect Lora E32 module to Raspberry Pi device and python code to send data between 2 modules using Lora communication.